Fiber cement lumber It is a synthetic material produced to replace real wood. began to be used in the construction of houses It is a mixture of cement, sand and wood pulp, which is processed by briquettes and baking. to get various shapes or sizes According to the nature of use such as floor planks, laths, planks, therefore fiber cement synthetic wood has properties that do not warp, do not corrode, are free from termites, moths and wood-eating insects. Can be used to replace the use of real wood in a variety of ways, such as artificial wood floors, artificial battens, slats, eaves, ceilings and other types of decorative works.
Fiber cement veneer
Timber, size 2 inches, length 3 meters, cement color type Must be used to paint the primer and topcoat paint type for the factory.
Fiber cement veneer
Lotus wood, size 4 inches, length 3 meters, cement color type Must be used to paint the primer and topcoat. Primer type Can be painted over the face. Type of finished paint from the factory
Fiber cement fence
Wood fence, size 4 inches, thickness 12-16 mm., length 1/ 1.5/3 meters, cement color type Must be used to paint the primer and topcoat. Primer type Can be painted over the face. Type of finished paint from the factory
Fiber cement eaves
Eaves wood, size 6 inches/8 inches, length 3 meters/4 meters, cement color type Must be used to paint the primer and topcoat. Primer type Can be painted over the face. Type of finished paint from the factory
Fiber cement floor
Floor plank, size, face 4/6/8 inches, thickness 25 mm., length 3 meters, cream primer type wood grain/wood grain Type of finished paint from the factory
Summary of the use of fiber cement lumber
Fiber cement lumber
fiber cement lumber Designed for building a house to replace real wood. Preliminary use should be used under the name and should not be misused.
- Fiber cement siding, size 6 m., thickness 8 mm. for exterior wall paneling. The recommended spacing of the frame is 60x120 cm.
- Fiber cement lath, size 2/3/4 inches, thickness 8 mm. for exterior ceiling work The recommended truss spacing is 40 cm. The recommended spacing of the frame is 50 cm.
- Fiber cement veneer, size 2 inches, thickness 8 mm., for internal/external horizons. There should be a frame around the rim. to hold the lumber
- Fiber cement veneer, thickness 8 mm., for sealing the edge between the floor and internal/external walls. The screw mounting distance is not more than 60 cm.
- Fiber cement fence, thickness 12 mm., 16 mm. for fence decoration Recommended spacing of the frame is – 12 mm. fence is not more than 40 cm. – 16 mm. fence is not more than 50 cm.
- Fiber cement eaves, face size 6/8/10 inches, thickness 16 mm. for roof truss decoration, 2 screw mounting points, distance not more than 60 cm.
- Fiber cement floor planks, face size /6/8/12 inches, thickness 25 mm., for internal and external floor paneling, recommended spacing of 30-40 cm.
- Fiber cement roof tiles
Fiber cement roof tiles, length 120 cm. and length 150 cm.
- Double corrugated model, factory-finished color.
Sample of SCG roof color, double color corrugated model
Pearl colored curls
The best value and peace of mind
- Beautiful color, outstanding, not fading.
- Tough, durable, impact resistant.
- Safe for asbestos that is a carcinogen.
Double Curved Cover Set, Elephant
- Double bolt guard.
- corrugated galvanized purlin
tools and equipment Install boards and fiber cement boards.
cutting tool Board and fiber cement board
4 inch angle grinder, variable speed type + 4 inch diamond cutting blade (dry cutting)
- Fiber cement board cutting. Should use a 4-inch angle grinder with adjustable speed by adjusting the rotation speed around 4000-5000 rev / min is suitable for the cutting job. ***Use the grinder for dry cutting only.
- General 4-inch angle grinder, which has a high rotational speed. 11,000-12,000 rpm, which is more suitable for grinding work.
- The use of high speed cutting. causing the grinder to flicker and more dangerous than low rpm
cutting tool Board and fiber cement board
4 inch circular saw + 4 inch diamond cutting blade (dry cutting)
- No-load speed: 4,000-4,900 rev/min at low speed, suitable for cutting boards. or fiber cement wood is good and safe
- The saw blade can be tilted to cut workpieces by 45 degrees, suitable for cutting lumber, cornices, eaves, floor planks at a 45-degree angle.
4 inch diamond cutting blade
- There are 2 types of 4 inch diamond cutting blades, dry cutting and dry/wet cutting. Cutting boards and fiber cement boards can be used to cut both types.
- Should buy diamond cutting blade thickness. If it is a thin type 1.0-1.6 mm. for roof tile work Fiber cement board will help to cut easily, cut quickly, cuts do not fly.
Installation drilling tool Board and fiber cement board
3/8” drill (3/8”), a standard size drill that is widely used. The weight is not too light and not too heavy.. Suitable for shooting screws, drilling fixings.
- Fiber cement board
- Fiber cement lumber
- gypsum board
- Fiber cement roof tiles, metal sheet roofs.
Screwdriver bit SCG PH2 50 mm.
- Block-head model prevents the screw head from sinking deeply.
PH2 screwdriver bit, length 45 mm.
- Screwdriver bit 45 mm., shorter span, making it easier to shoot screws than 65 mm.
Read more articles about building a house at trendyhome.co.th